




EII-2002E
Built on the RK3588 LGA SOM module, this controller is low-power and compact. It supports up to 8 GMSL camera inputs and EtherCAT/PTP real-time fieldbus, and integrates multiple isolated CAN FD, RS485 and USB 3.0 interfaces. It is widely deployed in humanoid robots, collaborative robots and other industries.
- •
- Based on the RK3588 octa-core processor
- •
- Up to 16 GB of RAM, optional
- •
- Up to 256 GB of onboard storage, optional
- •
- Supports M.2 PCIe 2280 NVMe SSD expansion
- •
- 3× RJ45, 4× CAN FD, 4× USB 3.0, 3× RS485
- •
- 4× Mini Fakra connectors, supporting up to 8 GMSL2 camera inputs
- •
- Ubuntu 22.04 / Ubuntu 24.04 support
- •
- DC 9–36 V wide-range input with overcurrent and overvoltage protection
- •
- Operating ambient temperature: 0–60 °C
| System | Barebone | Rockchip RK3588; Octa-core 64-bit processor; 4 x Cortex-A76 + 4 x Cortex-A55 |
| 6 TOPS (INT8) NPU | ||
| Up to 16 GB RAM; Up to 256 GB onboard storage | ||
| Expansion | 1 x M.2 2280 NVMe SSD | |
| 1 x M.2 2242 (PCIe X4) acceleration card: DEEPX M1M, 25 TOPS (INT8) NPU | ||
| Video | Input | 4 x Mini-FAKRA: |
| • MAX96712, 6Gbps | ||
| • Supports up to 8 x GMSL cameras, supports internal / external trigger | ||
| • Supports POC power supply | ||
| Output | 1 x HDMI 2.0 | |
| Network | Wired Network | 3 x RJ45 ports: |
| • Port 1 (native): Gigabit Ethernet, supports PTP, EtherCAT | ||
| • Port 2: 2.5G Ethernet, supports PTP, EtherCAT | ||
| • Port 3: Gigabit / 2.5G optional; when 2.5G is selected, supports PTP | ||
| Wi-Fi & BT | 1 x M.2 Key E for Wi-Fi & BT | |
| I/O | USB | 3 x USB 3.0 Type-A (USB3.0 GEN1, 5V, 1.5A, with latch) |
| 1 x USB 3.0 Type-C (5Gbps, 5V, 3A, supports OTG, with DP, plug and play, with latch) | ||
| CAN & 12V Power | 1 x 16-pin vehicle connector: | |
| • 4 x CAN FD (5Mbps): isolated, CAN_0 supports wake-up | ||
| • 1 x 12V power supply | ||
| Serial & 3.3V Power | 1 x 12-pin vehicle connector (gray, B-type latch): | |
| • 1 x UART: supports up to 1 Mbps baud rate | ||
| • 3 x RS485 | ||
| • 1 x 3.3V power supply | ||
| GPIO & 5V Power | 1 x 12-pin vehicle connector: | |
| • 8 x GPIO • 1 x 5V power supply | ||
| DEBUG & PWM Trigger Signal | 1 x 8-pin vehicle connector: | |
| • 1 x UART Debug port | ||
| • 1 x GMSL sync signal IO: PWM output for internal trigger, PWM input for external trigger | ||
| Power | Power Input | 9~36V DC IN |
| Power Consumption | System TDP: 15W | |
| Acceleration card TDP: 8W | ||
| Others | OS Support | Ubuntu 22.04 / Ubuntu 24.04 |
| Watchdog | 255-level programmable second/minute | |
| Installation | Mounting | Standard desktop mounting, wall mounting |
| Operating Environment | Operating Temperature | 0~60°C |
| Storage Temperature | -40 ~ 85°C (-40 ~ 185°F) | |
| Humidity | 10%~90% non-condensing | |
| Shock Resistance | Operating state, 15G@11ms half-sine wave | |
| Dimensions | L x W x H | 120 mm (L) × 120 mm (W) × 50 mm (H) |
Mobile robot solutions
Industrial robot solutions
Service robot solutions
From initial concept to final development, our expert product engineers deliver tailored hardware and software solutions—ready to assist you immediately.






